News - Page 8

What to Pay Attention to When Cleaning The Concrete Mixer

2024-09-04

The Importance of Regular Cleaning Concrete mixers often come into contact with materials like cement and sand, which can accumulate over time and reduce the machine's efficiency. If left uncleaned, concrete may solidify inside the mixer, making cleaning more difficult. Regular cleaning not only extends the machine's lifespan but also enhances operational efficiency. Use the Right Cleaning Tools and Methods When cleaning a concrete mixer, it's essential to use appropriate tools, such as a high-pressure water gun and specialized cleaning solutions. Avoid using sharp objects to prevent damage to the machine's surface. Key areas to focus on include the mixing blades, the inner walls of the mixing drum, and the discharge chute, as these areas are most prone to concrete buildup. Cleaning Steps Preparation: Turn off the power to the mixer and ensure there is no remaining concrete inside. Initial Cleaning: Use a high-pressure water gun to wash the inner and outer surfaces of the drum, removing large chunks of concrete residue. Deep Cleaning: Apply cleaning solutions and use brushes to thoroughly clean any remaining concrete, especially around the mixing...

Characteristics of Belt Loading Concrete Mixing Plant

2024-09-02

The characteristics of belt loading in concrete mixing stations mainly include the following aspects: 1. High efficiency: The belt loading method can realize a continuous and rapid loading process, thus improving production efficiency. Especially in large-scale operations, belt-type loading can significantly reduce construction time and improve the utilization rate of the production line. 2. Stability The stability of the conveyor belt can ensure the stable operation of the production line. The belt-type feeding conveyor belt is wider and can accommodate more raw materials, and uses a special transmission structure to effectively avoid tilt and material jamming problems. 3. Energy saving Compared with other feeding methods, belt feeding consumes less energy. It uses an electric motor to drive the conveyor belt, which only provides the power required by the conveyor belt, reducing energy consumption and thus saving costs. 4. Flexibility The belt loading method can be flexibly adjusted to adapt to different specifications and types of raw materials. The conveyor belt can be adjusted as needed to meet different loading needs. 5. Wide applicability The belt loading method is suitable for...

Do You Know the Common Problems and Solutions of Concrete Mixing Plant?

2024-08-28

The application of prevention and control of common quality defects in concrete has become an essential link in concrete construction. In the mixing process of concrete in the mixing station, there are often some problems, which bring trouble to the construction progress and quality. This paper analyzes the causes of common problems in mixing concrete and gives a series of solutions. I. Pumping Concrete Slump Loss, Slump Instability Problem Cause 1. Poor adaptability of concrete admixture and cement causes rapid slump loss of concrete. 2. The content of concrete admixture is not enough, and the effect of retarding and plastic preservation is not ideal. 3. The weather is hot, and some additives fail at high temperature; Water evaporates quickly; Bubble overflow causes rapid slump loss of fresh concrete. 4. The initial slump of concrete is too small, and the unit water consumption is too small. 5. The poor coordination between the construction site and the mixing station makes the tank car press and jam for too long, resulting in excessive slump loss of concrete. 6. Concrete mixing weighing system measurement...

Easily Damaged Parts of Concrete Mixing Plant

2024-08-16

1. Mixing blade and liner The material of mixing blade and liner is generally wear-resistant cast iron. When replacing, it is necessary to replace the accessories according to the requirements of the manual. 2. Conveyor belt Due to the bad load and use conditions, the conveying belt is easy to age or be damaged, so it needs to be replaced in time if it affects the production. 3. Sealing strip of discharge door of main engine After the sealing strip of the main machine discharge door of concrete mixing station is worn, the discharge door moves up. Assuming that adjusting the position of the discharge door can't compress the sealing strip and can't deal with leakage problems such as slurry leakage, it means that the sealing strip is seriously worn and it is necessary to replace it. 4. Filter element in powder tube dust collector After cleaning the filter element, the dust removal effect is still not good, so it is necessary to replace the filter element of the dust collector.

Matters Needing Attention in Summer Construction of Concrete Batching Plant

2024-08-15

When constructing a concrete mixing station in the summer, the high temperatures can present several challenges that need careful management to ensure the quality of the concrete and the safety of the construction process. Here are the key matters that require attention: By addressing these considerations, you can effectively manage the challenges of summer construction and ensure the quality, durability, and performance of the concrete produced during high-temperature conditions.

How to Produce Concrete Mixing Plant in High Temperature Season in Summer

2024-08-15

Producing concrete at a mixing station during high-temperature seasons, such as summer, requires specific strategies to prevent issues like rapid evaporation, reduced workability, and premature setting of the concrete. Here’s how to manage concrete production effectively in high temperatures: By implementing these strategies, you can mitigate the risks associated with high temperatures during summer and ensure the quality and durability of the concrete produced.

Matters Needing Attention in Winter Construction of Concrete Mixing Station

2024-08-15

When constructing a concrete mixing station in winter, several important considerations need to be taken into account to ensure the quality of the concrete and the safety of the construction process. Here are the key points to pay attention to: By paying attention to these factors, you can effectively manage the challenges of winter construction and ensure the success of the concrete mixing station project.

How to Realize the Construction of Concrete Mixing Station in Winter

2024-08-15

When constructing a concrete mixing station in winter, it’s crucial to address the challenges posed by low temperatures to ensure the quality of the concrete and the progress of the construction. Here are key steps and considerations: These measures help ensure the quality and progress of concrete mixing station construction during winter, avoiding issues related to low temperatures.

How to Maintain Concrete Mixing Plants in Winter

2024-08-15

When winter comes, the weather is getting colder and colder, but the use of concrete mixing station will not stop. However, when the temperature is low in winter, attention should be paid to the maintenance of concrete mixing station. So how should it be maintained in winter? 1.After the concrete mixing station is shut down, it is necessary to discharge all the liquid in the water tank from the water pump, water tank and admixture as soon as possible, so as to prevent the water from freezing due to the damage of the residual machinery and pipelines in the water tank, or the startup can not be started normally. 2.Concrete mixer to stop working for more than 4 hours should be compressed water and air bag water row, prevent water condensation after compression. 3.Diagonal belt if there is a sprinkler or belt conveyor idling should allow a period of time after the end of production, the cleaning belt scraped to the surface of the water, prolong the service life of the belt conveyor, vertical tension weight should be reduced and...

The Advantages of Hopper Type Concrete Mixing Station

2024-08-14

Hopper type concrete mixing station is a kind of building material manufacturing equipment which integrates material weighing, conveying, mixing and control system. It is mainly composed of main mixer, material weighing system, material conveying system (especially hopper), material storage system and control system. These systems work together to accurately weigh, transport, mix and stir cement, aggregate (such as sand, stone, etc.), water and other materials, and finally make concrete that meets the requirements. Skip loading concrete mixing plant has the following advantages: I. Small Footprint and Easy Installation 1. Hopper concrete mixing stations typically adopt a modular design, making their footprint relatively small and the installation process more convenient. This design not only saves space but also enhances the mixing station's ability to adapt to various complex environments, allowing for rapid deployment. 2. The main body of the mixing station occupies an area of less than 200 square meters at a minimum, which helps project parties fully conserve land resources and use the station even in extremely compact environments. 3. Installation is quick and convenient. With foundational work completed, a...